Welcome to www.augerteethreplacement.com

Foundation drilling equipment

» Blog » Foundation drilling equipment

Foundation drilling equipment

2017-09-09

Foundation drilling equipment
Augers:

It is called a drilling device which

inclusion of a rotating coiled screw blade usually known as fighting,It acts as transporter to move out the drilled material as the regular rotation of blade enables the material to remove from hole which is being drilled.

Earth Auger – Utilize for digging posthole.

This sort of auger is not automatically turned. So, it has turned manually or has to be powered by internal-combustion engine or from electric motor which can be perhaps connected to a tractor. Garden planting is an example where handheld auger can be used.

Drilling buckets:

It is used for drilling non-cohesive and cohesive that too below groundwater level. It is also good for ripping and breaking medium hard soil (rock). It fillips a heavy duty to suit to your machine. It is also designed to do manual operating.

Rock drilling buckets are made with top most grade materials and boast several practical features.

Casing Shoe:

In borehole mining and oil drilling, guide shoe or casing shoe is connected to the underneath of casing string; a bull- nose device shaped which allows it to be suspended supported

from the wellhead that is attached at the upper side of the casing

Core barrels:

They are used when augers are effectual that is when to drill something hard like drilling of very hard rock. It is designed with thin cut edge, as they can penetrate to their maximum

level through the area which have less contact and are to be removed by cutting

The range of core barrels is from 200mm to 300 mm in diameter which came fit with drive hub to match your machine.

Three varieties of core barrels are used:

single core barrel, double core barrel and triple core barrel. Among which the

single core barrel is cheapest.

Diaphragm wall Construction:

It is a regular wall constructed in ground which gives the facility to construct definite activities like

  1. a) As a hold, back wall
  2. b) A cut-off supply to encourage deep excavation
  3. c) A final wall for underground or another basement structure (e.g. shaft and tunnel)
  4. d) A separating construction between the major underground adeptness
  5. e) It forms foundation

This wall is usually designed for very depth purpose So very mechanical unearth method is employed.

The sequence of work is:

  1. a) Build the guide wall
  2. b) Digging to variety of the diaphragm
  3. c) Back up the trench
  4. d) Placing of concrete and inert reinforcement to build the wall panel

Maybe you like also

  • Categories