How long your road milling bits can serve you is an important factor to consider. Anyway, you don’t want to buy something that will be taking back to the market now and then. Value for money is critical, and that is why the lifespan of the bit should be a priority for any operator. If you own a road milling machines, the lifespan of the teeth or bits is a critical feature that you need to consider very serious. However, the power to determine the lifespan of road milling machine lies on the operator. In this article, you are going to look at the main tips to keep your road milling bits in good condition for longer useful life:
The quality of the road milling bits is one of the key features that you need to check carefully. It does not make sense at all if you have inferior wear parts in terms of quality. For instance, if you have poor quality milling bits, the impact will be on the entire machine. You will have a problem with the efficiency which will then affect the performance of the machine negatively. With the efficiency of the road milling machine going down, the rate of wear and tear on both the wear parts and the rest of the machine will increase tremendously. So, your milling bits should be constructed with the highest grade of raw material.
Proper maintenance has proven over the years to work great in extending the useful life of the machine. But you have to go beyond the scheduled maintenance as specified by the manufacturer. In most cases, milling machine manufacturer will specify that you get the machine maintained after a specific duration or worked hours. However, regular or daily maintenance is the best way to keep you wears parts and the entire machine in good shape. Make you that you have checked the condition of the road milling bits after milling to ensure that every tooth is okay. You might find a weakening joint or dulling tooth.
If a road milling bits are not repaired or replaced, then it will affect the performance, and the condition of the rest wear parts and more so the entire machine. If a broken milling bit is not repaired, then it put pressure the good ones and that will impact negatively on their condition. So, have the faulty parts repaired or replaced if the condition is beyond repair.